Taking good care of your quad is crucial to keeping it running smoothly for longer; thus, this post by Ed Welliver in Mission has put together helpful ATV maintenance tips. Read on to learn more.

Extend Your Quad's Life With These ATV Maintenance Tips

Check and Change Oil

Oil is the most important fluid for the operation of your quad; as such, our first ATV maintenance tip is to check its levels before each use. Your ATV's engine requires adequate lubrication to be protected against friction, heat, and rust. Without oil, the moving parts of your engine would be dry and prone to overheating, permanent damage, and premature corrosion and wear, hence the importance of keeping the lubricant reservoir topped up. Checking your engine's oil levels is a quick and easy task that you can do on your own; still, be sure to check the instructions described in your operator's manual. Usually, checking the oil levels consists of the following steps:

1. Park your ATV on a flat surface and let it cool down.
2. Run your engine for about 5 minutes to bring it to its operating temperature.
3. Turn the engine off and wait a couple of minutes for the oil to settle.
4. Locate the oil dipstick and remove it from the tube to clean it with a piece of cloth or paper towels.
5. Once clean, insert the dipstick back into the tube and wait a few seconds.
6. Pull the dipstick out again and see how far the oil reaches. Ideally, the oil level should be between the two dipstick marks.
7. If your oil level is low, add more fluid.

Another thing you can do to keep your engine well lubricated is to replace its oil from time to time. In that regard, you should know that this fluid breaks down after resisting pressure, extreme heat, and combustion particles (among other contaminants inside the engine) for a long time; therefore, it is essential to follow the oil change schedule described in your operator's manual.

Stay safe on the trails by keeping your ATV in top shape. Call Ed Welliver at (956) 458-9399, or browse AMSOIL's online shop to get the most effective synthetic oil in Mission.

Pay Attention to the ATV Fluids

Oil is undoubtedly the lifeblood of your ATV; however, there are other fluids that you need to check regularly, as they contribute to keeping your quad in optimal operating condition. For example, while coolant circulates through your engine, maintaining a safe and functional temperature range, brake fluid contributes to the operation of the braking system; likewise, the differential fluid provides adequate lubrication to the gears of the transmission system. With that said, it's essential to stay on top of your engine's fluid levels and service.

Keep Your Tires in Mint Shape

Your ATV's tires are designed to get a good grip on rough rocky terrains, muddy trails, dunes, and just about any other challenging terrain you can imagine. Being the only point of contact with different types of surfaces, they are prone to constant fluctuations in their air pressure, alignment, and weight, not to mention that each tire wears unevenly. Having noted that, it's critical that you follow the recommended service schedule for your tires outlined in your owner's manual. As for DIY checks, be sure to inspect each tire's tread depth and air pressure before each ATV ride. Also, check the tires for embedded nails, cuts, or visible damage at the end of each quad adventure.

Improve your ATV maintenance by giving it the most effective synthetic oil change in Mission. Call Ed Welliver at (956) 458-9399 and ask their oil pros about the most suitable formulas for your quad. Don't forget to visit AMSOIL's online store to place your order for top-shelf lubricants and products.

Finally, Inspect the Air Filter

The air filter keeps dust, airborne debris, and even small insects out of the engine. The filter can become clogged with impurities over time, reducing a clean airflow into the machine, which can be pretty risky since the engine needs oxygen for combustion. To prevent your engine from "suffocating," ensure to check and clean your air filter approximately every six months; doing so is very simple (consult your owner's manual for instructions) and significantly contributes to your engine's performance and life.

If you are looking for a top-quality formula to provide your quad's engine with superior wear and heat protection, try AMSOIL's 10W-40 Synthetic ATV/UTV Engine Oil. Call Ed Welliver at (956) 458-9399 to place your order for the top synthetic oil in Mission. You can also browse AMSOIL's online store to become familiar with the entire line of lubricants for your ATV.