Checking your car's fluids may sound like something that is difficult to do, but it's really quite easy. To learn how to check on your car's most important fluids, use this handy information.
How to Check on Your Car's Fluids
Since your car relies on a series of fluids to keep it running well, it only makes sense for you to get acquainted with them. If you're worried that you don't know enough to be able to check on the condition of your car's fluids, you really have nothing to worry about. Before giving up on this task, learn how to check on your motor oil and coolant in this post.
Checking on Your Motor Oil
Your car's motor oil is one of its most important fluids, so it only makes sense to learn how to check on it. If you're intimidated by jut the idea of checking on your car's oil, you really have nothing to worry about. Doing this is very easy and you can do it right from your driveway. You won't even need any special tools to get this job done.
First, park your car on a level surface since an incline can affect your oil reading. Once your car is as level as possible, pop open your hood and look for the oil dipstick. Once you've located it, pull it out and clean it off with a clean washcloth. To get the most accurate reading, stick it back in its place and pull it out again. This time, look at the oil at the end of the dipstick. You'll see two lines on the dipstick that are used to easily gauge how much oil your car has left. Your oil should fall somewhere in between these two lines, but if it's under the bottom line then you're running low. This can happen if you haven't replaced your oil in a long time, if your car is burning it off, or if you have a leak. It's a good idea to get your car checked just in case there is an issue.
Next up is checking the condition of your oil. In order to keep your car running smoothly, you'll have to get your oil changed periodically. Checking the condition of your oil will let you know it it's time for your next oil change. To check this, rub some of the oil off of the dipstick and feel it with your fingers. Ideally, your oil should be slick, somewhat translucent, and a light shade. If it's gritty, thick, opaque, or smells burnt, it's definitely time for an oil change.
Click here to buy Signature Series 0W-20 Synthetic Motor Oil and give your car a synthetic oil change in Mission. To find even more great products like this, contact the oil pros at Oils RGV by calling (956) 458-9399. You can also check out their online store for even more products or to place your order.
How to Check on Your Coolant
Your coolant's main job is to keep your engine running at a reasonable temperature so that it doesn't overheat. This may sound simple enough, but you'll need to make sure your coolant is still in good condition so that it can get this done effectively.
To check on your coolant, wait until your car is completely cool. If you attempt to check on it after a long drive while your engine is still hot, you risk getting serious burns. Once your car is cool and it's safe, open up your car's hood and locate the coolant reservoir. In most cases, you won't have to do much more than look at the reservoir because it's a translucent container. It'll have some markers on the side that make it even easier to see if you still have enough coolant. If your coolant level reaches the full line, then you're good. If it's running low, top it off with the same type of coolant before you have any road troubles.
Next, look at the color of your coolant to decide if it needs replacing. Your coolant should still be the same color as when it was new. Usually, this will be a bright yellow, green, blue, or red. If the color has changed significantly or if it looks rusty, consider flushing and replacing your coolant for the best results.
Give Your Car a Synthetic Oil Change in Mission
Keep your car in great shape with the help of a synthetic oil change in Mission. To learn all about the benefits of a synthetic oil change, contact the friendly oil experts at Oils RGV by calling (956) 458-9399.